Martin Draksler

Znanstveni sodelavec

Institut "Jožef Stefan"
Jamova cesta 39
SI-1000 Ljubljana
Slovenija

Telefon: +386 1 5885 320
Faks: +386 1 5885 377
E-pošta: martin.draksler@ijs.si

Delovna področja

• Znanstveno-raziskovalno delo
  • Numerično modeliranje turbulentnih tokov in prenosa toplote
  • Termohidravlika jedrskih reaktorjev
• Delo na aplikativnih projektih
  • Termo-hidravlične analize kompleksnih sistemov
  • Strokovna presoja (pooblaščeni izvedenec za jedrsko in sevalno varnost)

Izobrazba

• Doktor znanosti s področja jedrske tehnike (Fakulteta za matematiko in fiziko, Univerza v Ljubljani, 2015)
• Univerzitetni diplomirani fizik (Fakulteta za matematiko in fiziko, Univerza v Ljubljani, 2010)

Nagrade

• Nagrada za najboljši prispevek na tekmovanju mladih avtorjev na konferenci "Nuclear Energy for New Europe 2009".

Delovne izkušnje

• Od 2010 sem zaposlen na Odseku za reaktorsko tehniko, Institut Jožef Stefan

Izbrane objave

Celotni spisek objav vzdržuje COBISS. Povezave na objave so pripravljene z uporabo Digital Object Identifier System DOI.

ÄŒlanki v SCI revijah

KONÄŒAR, Boštjan, GARRIDO, Oriol Costa, DRAKSLER, Martin, BROWN, Richard, COLEMAN, Matti. Initial optimization of DEMO fusion reactor thermal shields by thermal analysis of its integrated systems. Fusion engineering and design, ISSN 0920-3796. [Print ed.], 2017, vol. 125, str. 38-49, doi: 10.1016/j.fusengdes.2017.10.017. [COBISS.SI-ID 30903847]

KONÄŒAR, Boštjan, DRAKSLER, Martin, GARRIDO, Oriol Costa, MESZAROS, Botond. Thermal radiation analysis of DEMO tokamak. Fusion engineering and design, ISSN 0920-3796. [Print ed.], 5. str., doi: 10.1016/j.fusengdes.2017.03.134. [COBISS.SI-ID 30401575]

DRAKSLER, Martin, KONÄŒAR, Boštjan, CIZELJ, Leon, NIÄŒENO, Bojan. Large Eddy Simulation of multiple impinging jets in hexagonal configuration : flow dynamics and heat transfer characteristics. International journal of heat and mass transfer, ISSN 0017-9310. [Print ed.], 2017, vol. 109, str- 16-27, doi: 10.1016/j.ijheatmasstransfer.2017.01.080. [COBISS.SI-ID 30239783]

DRAKSLER, Martin, NIÄŒENO, Bojan, KONÄŒAR, Boštjan, CIZELJ, Leon. Large eddy simulation of multiple impinging jets in hexagonal configuration - Mean flow characteristics. International journal of heat and fluid flow, ISSN 0142-727X. [Print ed.], 2014, vol. 46, str. 147-157, doi: 10.1016/j.ijheatfluidflow.2014.01.005. [COBISS.SI-ID 27510823]

KONÄŒAR, Boštjan, DRAKSLER, Martin, NORAJITRA, Prachai. Design and cooling of the edge segments of the DEMO divertor target plates. V: Proceedings of the 27th Symposium on Fusion Technology, SOFT-27, Liège, Belgium, September 24-28, 2012, (Fusion engineering and design, ISSN 0920-3796, vol. 88, no. 6/10, 2013). Amsterdam: North Holland, 2013, vol. 88, no. 9/10, str. 1831-1835, doi: 10.1016/j.fusengdes.2013.05.112. [COBISS.SI-ID 26839335]

KONÄŒAR, Boštjan, SIMONOVSKI, Igor, DRAKSLER, Martin. Influence of multiple jet cooling on the heat transfer and thermal stresses in DEMO divertor cooling finger = f. Fusion Engineering and Design, ISSN 0920-3796. [Print ed.], 2011, vol. 25, no. 2, str. 537-548, doi: 10.1016/j.fusengdes.2010.10.006. [COBISS.SI-ID 24273191]

DRAKSLER, Martin, KONÄŒAR, Boštjan. Analysis of heat transfer and flow characteristics in turbulent impinging jet. V: MAVKO, Borut (ur.), HASSAN, Yassin A. (ur.), CIZELJ, Leon (ur.). Special issue on the International Conference Nuclear Energy for New Europe 2009, September 14 and 17, 2009, Bled, Slovenija, (Nuclear engineering and design, ISSN 0029-5493, vol. 241, no. 4, 2011). Amsterdam: North-Holland, 2011, vol. 241, no. 4, str. 1248-1254, doi: 10.1016/j.nucengdes.2010.03.037. [COBISS.SI-ID 23868711]