|
|
| dr. Samir El Shawish |
- Fatigue life uncertainties
- Non-destructive techniques for damage characterization of structural components in NPPs
- Ageing mechanisms in structural components of NPPs
- Crystal plasticity theory
- Strain-gradient crystal plasticity theory
- FFT-based method in computational crystal plasticity
|
| dr. Boštjan Končar |
- Različne teme s področja prenosa toplote v komponentah fuzijskih naprav.
|
| prof. dr. Iztok Tiselj |
- Kulinarična dinamika tekočin
- Metode za zajemanje medfazne površine v dvofaznih tokovih
- Metode POD, SPOD, DMD za diseminacijo koherentnih struktur v turbulentnih tokovih
|
|
|
| dr. Mitja Uršič |
- Stability of the Auxiliary Feedwater System Regulation in Pressurized Water Reactor
- 3D modeliranje hlajenja razbitkov v eksperimentalni napravi FLOAT
- Razvoj nadomestnega modela hlajenja razbitkov taline s pomočjo umetne inteligence
- Sklopljeno modeliranje hlajenja razbitkov taline v rekatorskih razmerah
- Eksperiment poplavljanja porozne snovi
- Plastno uparjanje med težko nesrečo
- Modeliranje razpada taline v razslojenih razmerah
- Jakost parne eksplozije v reaktorskih razmerah
|
| prof. dr. Leon Cizelj |
- Statistical analysis of intergranular stresses in elasto-plastic polycrystalline metals
- Explicit modelling of dislocation channels in neutron-irradiated stainless steel
- Modelling slip transmission at grain boundaries of irradiated stainless steel
- Modeling of brittle crack growth initiation and arrest using XFEM under PTS loads
- Thermal fatigue crack growth modeling with FEM and XFEM under fluid mixing
- Damage modelling techniques for brittle and ductile fracture
- Uncertainties in fatigue-life predictions due to cycle-counting methods
- Deterministic mesoscale modelling of IGSCC in austenitic stainless steels
- Probabilistic mesoscale modelling of IGSCC in austenitic stainless steels
- Verification of FEM and XFEM in fracture mechanic applications with thermo-mechanical loads
- Verification of FEM codes performance: ABAQUS vs FEniCS
|
| dr. Martin Draksler |
- Analiza tokovnih nestabilnosti in stratifikacije v slepi cevi varnostnega vbrizgavanja tlačnovodnega reaktorja
|
| dr. Ivo Kljenak |
- Gravity-driven injection from accumulators
- Distribution of decay heat during molten-core concrete interaction
|
| prof. dr. Iztok Tiselj |
- LES simulacije toka v kvadratnem kanalu z različnimi resolucijami in gostotami mrež: poudarek na sekundarnih tokovih
- Stabilnost Rayleigh-Bénardove konvekcije
- Tok tekočine skozi porozne medije
- Razvoj modelov za združevanje ali razpad mehurjev v simulacijah z metodo volumnov tekočine (VOF)
- Tridimensional measurement of velocity field in fluid flows
- Prehod udarnega vala skozi stopničasto zožitev cevi
|
| dr. Boštjan Končar |
- CFD modelling of Departure from Nucleate Boiling (DNB)
- Two-fluid simulation of boiling flow in an internally heated annulus
- Semi-mechanistic boiling model
- CFD analysis of heat transfer and two-phase flow in a heat pipe
- HIgh-fidelity simulation of a single boiling bubble
- IR measurements of heated foil temperature in a square channel flow
- Macroscopic characteristics of flow boiling in a top-heated square channel
- Experimental analysis of boiling flow in temperature-controlled vertical annular test section
- Experimental determination of the nucleation site density with an IR camera
- NN based image processing techniques for two-phase flow analysis
- Effect of flow orientation on boiling flow characteristics in annular test section
|
| dr. Samir El Shawish |
- Statistical analysis of intergranular stresses in elasto-plastic polycrystalline metals
- Explicit modelling of dislocation channels in neutron-irradiated stainless steel
- Modelling slip transmission at grain boundaries of irradiated stainless steel
- Deterministic mesoscale modelling of IGSCC in austenitic stainless steels
- Probabilistic mesoscale modelling of IGSCC in austenitic stainless steels
|
|
|
|
dr. Blaž Mikuž
prof. dr. Iztok Tiselj
dr. Mitja Uršič
|
Eksperimentalno delo v laboratoriju THELMA:
- vrenje ob gorivni palici
- vrenje ob vroči foliji
- meritve topologije izotermnih dvofaznih tokov vode in zraka.
|
| prof. dr. Leon Cizelj |
- Mikromehanski model naključnega napredovanja medkristalnih razpok.
|
| dr. Ivo Kljenak |
- Transport aerosolov v zadrževalnem hramu jedrske elektrarne;
- Trirazsežno modeliranje podhlajenega mehurčkastega vrenja pri nizkih tlakih.
|
| dr. Samir El Shawish |
- Študentom je na več naslovov doktorskih nalog na temo staranja nerjavnih jekel zaradi nevtronskega obsevanja ter določanja oz. ocenjevanja medkristalnih napetosti v splošnem strukturnem kovinskem materialu.
|
| dr. Boštjan Končar |
- Modeliranje konvektivnega vrenja v bližini kritičnega toplotnega toka.
|
JavnostPartnerjiMediji
EN
